Inquire Now

Q35Y Universal Hydraulic Ironworker Machine

Q35Y Universal Hydraulic Ironworker
Q35Y Universal Hydraulic Ironworker Machine

Q35Y Universal Hydraulic Ironworker Machine

Q35Y  universal hydraulic ironworker machine can cut and punch all kinds of materials such as plate, square bar, angle, round bar, channel and so on.Prima hydraulic ironworkers have been designed and built to the highest quality standards in the industry. This profitable machine will serve any grueling fabrication shop for decades to come. This machine is typically in stock for quick deliveries.

Get Free Quote

Categorize

Get In Touch
Product Description

 Main Components of Q35Y Universal Hydraulic Ironworker Machine

Main motor: Siemens

Hydraulic Valves and Pump: Huader, Beijing, China best. Bosch Optional.

Electrics: SCHNEIDER

Sealing：NOK, Japan

Tools: All Heating Treatment

Functions of Q35Y Universal Hydraulic Ironworker Machine

1)Punching: Full range of universal punches and dies are available. Unique style allows for large angle iron punching and large channel punching. Large viewing window on stripper swing away design for ease of operation. Large two piece gauging table with rulers and stop as standard fittings. Quick change coupling nut and sleeve for rapid replacement of change.

2)Shearing: Round and square bar shear has multiple holes for a variety of sizes. Adjustable hold down device for round/square bar, channel/beam cutting. Large strong guarding for max safety. The angle shear has the ability to cut angle at 45°both top and bottom leg. This gives the operator the ability to make a picture frame corner for perfect welds. Diamond shaped blade for quality cuts that is minimal material lost and deformity. Easily adjustable hold-down device for accurate plate cutting. Large 15″squaring arm with inlaid scale. Special anti-distorted blade for quality cutting. Lower blade has four usable edges. There is screw allow for gap adjust no shim needed.

3)Notching: Unique design allows for cutting of angle and flat bar. Electrical interlock safety guard and three gauging stops for precise positioning. The notching section of this hydraulic ironworker is perfect for notching out metal plate, angle iron and much more. The notching station also has an over sized table with material stops. This section of the machine can also be outfitted with the optional vee notcher.

4)Bending: Also bend the plate below 500mm. All the components of Machine are of the highest quality in their safety, function.

Q35Y Universal Hydraulic Ironworker Machine functions

Q35Y Universal Hydraulic Ironworker Machine functions

Δ* ATTENTION

Operation Condition: Power supply:3Ph AC 220V/380/415 ± 10%, 50/60 HZ, optional to site.   Ambient Temperature:-10 ℃ ~ 45 ℃

Parameters of Q35Y Series Universal Hydraulic Ironworker Machine

Model Q35Y-16 Q35Y-20 Q35Y-25 Q35Y-30 Q35Y-40 Q35Y-50
Ramming strength (ton) 65 90 120 160 200 250
May cut the biggest thickness of slab 16(millimeter) 20 25 30 35 50
Sheet intensity (Newton/millimeter 2) ≤450 ≤450 ≤450 ≤450 ≤450 ≤450
A traveling schedule cuts the board size (thick * wide) (millimeter) 16*250
8*400		 20*330
10*480		 25*330
16*600		 30*330
20*600		 35×400 25×700 40*40030*750
Slide stroke 80 80 80 80 80 80
Traveling schedule number of times (/minute) 12 12 10 10 10 10
Throat opening depth 300(millimeter) 355 400 600 600 600
Punch holes thickness 16(millimeter) 20 25 26 35 40
Biggest punch holes diameter (millimeter) 25 30 35 38 40 40
Main electrical machinery power (kilowatt) 55 7.5 11 11 15 22
External dimensions (long * wide * high) millimeter 1750*830*2000 1930*900*2000 2200*1000*2100 2900*1200*2600 2970*1240*2650 3200*1440*2750
Machine weight (kg) 2000 3100 4600 7200 9500 12800

Profiles Parameters of Q35Y Series Universal Hydraulic Ironworker Machine

Profile Round Bar Square Bar Equal Angle T-Bar I-Beam Channel
90°Shearing 45°Shearing 90°Shearing 45°Shearing
Section View Round Bar Square Bar Equal Angle T-Bar joistq Channel
Q35Y-16 45 40*40 125*125*12 50*50*5 120*120*12 60*60*8 126*74*5 126*53*5.5
Q35Y-20 50 50*50 140*140*12 50*50*5 140*140*12 70*70*10 160*86*8 160*60*6.5
Q35Y-25 60 50*50 160*160*14 60*60*6 160*160*14 80*80*10 200*102*9 210*75*9
Q35Y-30 65 55*55 180*180*16 60*60*6 180*180*16 80*80*10 280*124*10.5 260*86*11.5
Q35Y-40 70 60*60 200*200*18 100*100*10 160*160*16 80*80*10 300*126*11 300*89*12
Q35Y-50 80 65*65 200*200*20 120*120*10 180*180*16 80*80*10 320*130*10 320*92*12

W12 Hydraulics Plate Rolling Machine With 4 Rolls Performance Features

  • It’s easy to operate, rich shape bend;
  • CNC control, digital readout for position of each rollers. High accuracy and precision circle;
  • Full hydraulic drive, High eficiency and energy saving, the drive power is equivalent to the traditional 60%;
  • Once forming,the productivity is higher 50%- 80% than three roller bending machine;
  • Aligning the material is convenient and accurate, avoid the wrong side phenomenon;
  • Cone bending device;
  • Permanent lubrication (bearing life without refueling);
  • The top and bottom roller clamp the plate during rlling without slipping;
  • The minimum bending diameter of the cylinder can get to 1.1 times the diameter of the top roller, the surplus flat edge smaller than any type of other plate rolling machine;
  • The carrying device and feeding device and support device can be installed easily;
  • CE certificate.

W12 Hydraulics Plate Rolling Machine With 4 Rolls Working Principle

working principle

W12 Hydraulics Plate Rolling Machine With 4 Rolls Technical Parameters

Model Max.Bending thickness Pre-bending thickness Max. Working length of rolls Yield limit Top roller diameter Bottom roller diameter Side roller diameter Main power
(mm) (mm) (mm) (Mpa) (mm) (mm) (mm) (Kw)
W12-4×2000 4 3.5 2050 245 160 140 120 3
W12-6×2000 6 5 2050 245 190 170 150 4
W12-8×2000 8 6.5 2050 245 210 190 170 5.5
W12-10×2000 10 8 2050 245 230 210 190 7.5
W12-12×2000 12 10 2050 245 270 250 210 11
W12-16×2000 16 13 2050 245 300 270 220 11
W12-20×2000 20 16 2050 245 330 300 240 11
W12-25×2000 25 20 2050 245 360 330 250 15
W12-30×2000 30 25 2050 245 390 360 300 18.5
W12-35×2000 35 28 2050 245 430 390 330 22
W12-40×2000 40 32 2050 245 460 420 360 30
W12-45×2000 45 36 2050 245 510 460 390 37
W12-50×2000 50 40 2050 245 550 510 420 45
W12-4×2500 4 3.5 2550 245 190 170 150 4
W12-6×2500 6 5 2550 245 210 190 170 5.5
W12-8×2500 8 6.5 2550 245 230 210 190 7.5
W12-10×2500 10 8 2550 245 270 250 210 11
W12-12×2500 12 10 2550 245 300 270 220 11
W12-16×2500 16 13 2550 245 330 300 240 11
W12-20×2500 20 16 2550 245 360 330 250 15
W12-25×2500 25 20 2550 245 390 360 300 18.5
W12-30×2500 30 25 2550 245 430 390 330 22
W12-35×2500 35 28 2550 245 460 420 360 30
W12-40×2500 40 32 2550 245 510 460 390 37
W12-45×2500 45 36 2550 245 550 510 420 45
W12-4×3000 4 3.5 3100 245 210 190 170 5.5
W12-6×3000 6 5 3100 245 230 210 190 7.5
W12-8×3000 8 6.5 3100 245 270 250 210 11
W12-10×3000 10 8 3100 245 300 270 220 11
W12-12×3000 12 10 3100 245 330 300 240 11
W12-16×3000 16 13 3100 245 360 330 250 15
W12-20×3000 20 16 3100 245 390 360 300 18.5
W12-25×3000 25 20 3100 245 430 390 330 22
W12-30×3000 30 25 3100 245 460 420 360 30
W12-35×3000 35 28 3100 245 510 460 390 37
W12-40×3000 40 32 3100 245 550 510 420 45
W12-50×3000 50 40 3100 245 610 560 480 55
W12-60×3000 60 48 3100 245 670 620 520 75

 Main Components of Q35Y Universal Hydraulic Ironworker Machine

Main motor: Siemens

Hydraulic Valves and Pump: Huader, Beijing, China best. Bosch Optional.

Electrics: SCHNEIDER

Sealing：NOK, Japan

Tools: All Heating Treatment

Functions of Q35Y Universal Hydraulic Ironworker Machine

1)Punching: Full range of universal punches and dies are available. Unique style allows for large angle iron punching and large channel punching. Large viewing window on stripper swing away design for ease of operation. Large two piece gauging table with rulers and stop as standard fittings. Quick change coupling nut and sleeve for rapid replacement of change.

2)Shearing: Round and square bar shear has multiple holes for a variety of sizes. Adjustable hold down device for round/square bar, channel/beam cutting. Large strong guarding for max safety. The angle shear has the ability to cut angle at 45°both top and bottom leg. This gives the operator the ability to make a picture frame corner for perfect welds. Diamond shaped blade for quality cuts that is minimal material lost and deformity. Easily adjustable hold-down device for accurate plate cutting. Large 15″squaring arm with inlaid scale. Special anti-distorted blade for quality cutting. Lower blade has four usable edges. There is screw allow for gap adjust no shim needed.

3)Notching: Unique design allows for cutting of angle and flat bar. Electrical interlock safety guard and three gauging stops for precise positioning. The notching section of this hydraulic ironworker is perfect for notching out metal plate, angle iron and much more. The notching station also has an over sized table with material stops. This section of the machine can also be outfitted with the optional vee notcher.

4)Bending: Also bend the plate below 500mm. All the components of Machine are of the highest quality in their safety, function.

Q35Y Universal Hydraulic Ironworker Machine functions

Q35Y Universal Hydraulic Ironworker Machine functions

Δ* ATTENTION

Operation Condition: Power supply:3Ph AC 220V/380/415 ± 10%, 50/60 HZ, optional to site.   Ambient Temperature:-10 ℃ ~ 45 ℃

Parameters of Q35Y Series Universal Hydraulic Ironworker Machine

Model Q35Y-16 Q35Y-20 Q35Y-25 Q35Y-30 Q35Y-40 Q35Y-50
Ramming strength (ton) 65 90 120 160 200 250
May cut the biggest thickness of slab 16(millimeter) 20 25 30 35 50
Sheet intensity (Newton/millimeter 2) ≤450 ≤450 ≤450 ≤450 ≤450 ≤450
A traveling schedule cuts the board size (thick * wide) (millimeter) 16*250
8*400		 20*330
10*480		 25*330
16*600		 30*330
20*600		 35×400 25×700 40*40030*750
Slide stroke 80 80 80 80 80 80
Traveling schedule number of times (/minute) 12 12 10 10 10 10
Throat opening depth 300(millimeter) 355 400 600 600 600
Punch holes thickness 16(millimeter) 20 25 26 35 40
Biggest punch holes diameter (millimeter) 25 30 35 38 40 40
Main electrical machinery power (kilowatt) 55 7.5 11 11 15 22
External dimensions (long * wide * high) millimeter 1750*830*2000 1930*900*2000 2200*1000*2100 2900*1200*2600 2970*1240*2650 3200*1440*2750
Machine weight (kg) 2000 3100 4600 7200 9500 12800

Profiles Parameters of Q35Y Series Universal Hydraulic Ironworker Machine

Profile Round Bar Square Bar Equal Angle T-Bar I-Beam Channel
90°Shearing 45°Shearing 90°Shearing 45°Shearing
Section View Round Bar Square Bar Equal Angle T-Bar joistq Channel
Q35Y-16 45 40*40 125*125*12 50*50*5 120*120*12 60*60*8 126*74*5 126*53*5.5
Q35Y-20 50 50*50 140*140*12 50*50*5 140*140*12 70*70*10 160*86*8 160*60*6.5
Q35Y-25 60 50*50 160*160*14 60*60*6 160*160*14 80*80*10 200*102*9 210*75*9
Q35Y-30 65 55*55 180*180*16 60*60*6 180*180*16 80*80*10 280*124*10.5 260*86*11.5
Q35Y-40 70 60*60 200*200*18 100*100*10 160*160*16 80*80*10 300*126*11 300*89*12
Q35Y-50 80 65*65 200*200*20 120*120*10 180*180*16 80*80*10 320*130*10 320*92*12
Get In Touch

Related Products

Related products

Related Blog

Get Free Quote